Application

2% Sheen Flat Matt Finish

Fenwick & Tilbrook Pure Matt emulsion is recommended for plaster walls and ceilings, but can also be applied to internal woodwork, metalwork and masonry.

Bare metal should be treated with a suitable primer before applying Fenwick & Tilbrook paint.

PROPERTIES:

  • Outstanding durability
  • Extraordinary depth of colour
  • Ease of application
  • Covers up to 10sqm per litre
  • Extremely low odour
  • Very low VOC content

 

APPLICATION NOTES:

New plaster and porous surfaces:

  1. The surface must be clean and dry
  2. Apply one coat of Pure Matt thinned with water (one part water, nine parts paint)*
  3. Apply two coats of Pure Matt

 

Previously painted surfaces:

  1. Thoroughly wash down and remove all flaking and defective coating
  2. Make good any cracks and defects
  3. Thoroughly rub down to create a matt surface
  4. The surface must be clean and dry
  5. For any exposed-to-bare areas, apply one coat of Pure Matt thinned with water (one part water, nine parts paint)*
  6. Apply two coats of Pure Matt
  7. Bright or light colours may require additional coats

 

DRYING TIMES

Touch dry in around 30 minutes

Interval between coats c.1 hour

Based on 23°C ambient temperature, 50% relative humidity, 50 micron dry film thickness (DFT)

Temperature, humidity and thickness of coat will affect drying times

APPLICATION METHODS

Suitable for application by brush, roller or airless spray

PRIMING

Fenwick & Tilbrook paints are self priming; however, if a heavily repaired substrate has a variation of porosity and colours, priming is recommended as a first coat to create an even base colour. Prime new, bare and porous surfaces by using one coat of Fenwick & Tilbrook paint thinned with water (one part water, nine parts paint).

10% Sheen – Matt Finish

Fenwick & Tilbrook Interior Eggshell is a tough, self-priming paint with a soft and delicate sheen.

Interior Eggshell is suitable for woodwork, plaster, masonry and metalwork.

Bare metal should be treated with a suitable metal primer before applying Fenwick & Tilbrook paint.

PROPERTIES:
– Outstanding durability
– Extraordinary depth of colour
– Ease of application
– Covers up to 10sqm per litre
– Extremely low odour
– Very low VOC content

 

APPLICATION NOTES

New plaster and porous surfaces:

1. The surface must be clean and dry
2. Apply one coat of Interior Eggshell, thinned with water (one part water, nine parts paint)*
3. Apply two coats of Interior Eggshell

Previously painted surfaces:
1. Thoroughly wash down and remove all flaking and defective coating
2. Make good any cracks and defects
3. Thoroughly rub down to create a matt surface
4. The surface must be clean and dry
5. For any exposed-to-bare areas, apply one coat of Interior Eggshell, thinned with water (one part water, nine parts paint)*
6. Apply two coats of Interior Eggshell
7. Bright or light colours may require additional coats

DRYING TIMES

Touch dry in around 60 minutes
Interval between coats c. 2 hours
Based on: 23°C ambient temperature, 50% relative humidity, 50 micron dry film thickness (DFT).
Temperature, humidity, ventilation and thickness of coat will affect drying times.

APPLICATION METHODS
Suitable for application by brush, roller or airless spray.

*PRIMING
Fenwick & Tilbrook paints are self-priming; however, if a heavily repaired substrate has a wide variation of porosity and colours, priming is recommended as a first coat to create an even base colour. Prime new, bare and porous surfaces using one coat of Fenwick & Tilbrook paint, thinned with water (one part water, nine parts paint).

20% Sheen – Satin Finish

Fenwick & Tilbrook Exterior Eggshell is tough and self-priming, and possesses a soft sheen that belies its outstanding resilience.

Exterior Eggshell is suitable for woodwork, plaster, masonry and metalwork.

Bare metal should be treated with a suitable metal primer before applying Fenwick & Tilbrook paint.

Bare or loose masonry should be treated and sealed with a suitable acrylic primer before applying Fenwick & Tilbrook paint.

PROPERTIES:
– Outstanding durability
– Excellent elasticity, allowing natural movement
– Extraordinary depth of colour
– Ease of application
– Covers up to 12sqm per litre
– Extremely low odour
– Very low VOC content

 

APPLICATION NOTES

New and porous surfaces:
1. The surface must be clean and dry
2. Apply one coat of Exterior Eggshell as a sealing and priming coat*
3. Apply two coats of Exterior Eggshell

Previously painted surfaces:

1. Thoroughly wash down and remove all flaking and defective coating
2. Make good any cracks and defects
3. Thoroughly rub down to create a matt surface
4. The surface must be clean and dry
5. For any exposed-to-bare areas, apply one coat of Exterior Eggshell as a sealing and priming coat*
6. Apply two coats of Exterior Eggshell
7. Bright or light colours may require additional coats

DRYING TIMES

Touch dry in around 60 minutes
Interval between coats c. 2 hours
Based on: 23°C ambient temperature, 50% relative humidity, 50 micron dry film thickness (DFT).
Temperature, humidity, ventilation and thickness of coat will affect drying times.

APPLICATION METHODS
Suitable for application by brush, roller or airless spray.

15% Sheen Satin Finish

Fenwick & Tilbrook Ultimate Masonry is tough and self-priming, and possesses a soft sheen that belies its outstanding resilience. Ultimate Masonry is suitable for all masonry surfaces.

Bare or loose masonry should be treated and sealed with a suitable acrylic primer before applying Fenwick & Tilbrook paint.

PROPERTIES:

  • Outstanding durability
  • Excellent elasticity allowing natural movement
  • Extraordinary depth of colour
  • Ease of application
  • Covers up to 12sqm per litre
  • Extremely low odour
  • Very low VOC content

 

APPLICATION NOTES:

New plaster and porous surfaces:

  1. The surface must be clean and dry
  2. Apply one coat of Ultimate Masonry as a sealing and priming coat*
  3. Apply two coats of Ultimate Masonry

Previously painted surfaces:

  1. Thoroughly wash down and remove all flaking and defective coating
  2. Make good any cracks and defects
  3. Thoroughly rub down to create a matt surface
  4. The surface must be clean and dry
  5. For any exposed-to-bare areas, apply one coat of Ultimate Masonry as a sealing and priming coat*
  6. Apply two coats of Ultimate Masonry
  7. Bright or light colours may require additional coats

 

DRYING TIMES

Touch dry in around 60-120 minutes

Interval between coats c. 4 hours

Based on 23°C ambient temperature, 50% relative humidity, 50 micron dry film thickness (DFT)

Temperature, humidity and thickness of coat will affect drying times

APPLICATION METHODS

Suitable for application by brush, roller or airless spray.

A water-based, multi-purpose bonding primer suitable for use on wood, masonry, metal, MDF, melamine, PVC and ceramic tiles. The low VOC water-based formulation is ideal for both interior and exterior use. Ideally suited as a primer for our Fenwick & Tilbrook Interior and Exterior Eggshell paint.

Available in White or Grey in 1L, 2.5L and 5L tins.

USE

Stir thoroughly before use. Apply liberally and evenly by brush.

Preparation of the surface to be painted is vital to the performance of your Fenwick & Tilbrook paint. Make good any structural cracks or defects, and match the finish to the existing substrate. Use flexible fillers only. Wash down and remove old flaking or defective coating.

A glossy painted surface must be sanded to a matt finish prior to applying the first coat of Fenwick & Tilbrook paint. Avoid the inhalation of dust. Wear a suitable face mask when dry sanding.

Coverage approximately 12sqm per litre.

Touch dry in 60 minutes, and can be re-coated after 4 hours. Allow primer to fully dry before applying any finishing coat. Allow longer in cool or damp conditions. (Do not apply at temperatures below 5°C .)

CLEAN UP

Remove as much product as possible from brushes and equipment before cleaning with warm water. Do not empty into drains or watercourses. Some local authorities have special facilities for the disposal of waste coatings.

STORAGE AND STABILITY

Store upright in dry conditions above 5°C. Protect from frost. To avoid risk of spillage, always store and transport in a secure, upright position.

Fenwick & Tilbrook paint has very low VOCs and is therefore almost completely odourless, making it perfect for your child’s bedroom.

All Fenwick & Tilbrook paints are water based.

Updating…
  • No products in the basket.